# This template contains all of the possible sections and their default values

# Note that all fields that take a lint level have these possible values:
# * deny - An error will be produced and the check will fail
# * warn - A warning will be produced, but the check will not fail
# * allow - No warning or error will be produced, though in some cases a note
# will be

# The values provided in this template are the default values that will be used
# when any section or field is not specified in your own configuration

# This section is considered when running `cargo deny check advisories`
# More documentation for the advisories section can be found here:
# https://embarkstudios.github.io/cargo-deny/checks/advisories/cfg.html
[advisories]
# The path where the advisory database is cloned/fetched into
db-path = "~/.cargo/advisory-db"
# The url(s) of the advisory databases to use
db-urls = ["https://github.com/rustsec/advisory-db"]
# The lint level for crates that have been yanked from their source registry
yanked = "warn"
# A list of advisory IDs to ignore. Note that ignored advisories will still
# output a note when they are encountered.
ignore = [
    # criterion 0.4.0 depends on a version of atty w/unaligned reads
]
# Threshold for security vulnerabilities, any vulnerability with a CVSS score
# lower than the range specified will be ignored. Note that ignored advisories
# will still output a note when they are encountered.
# * None - CVSS Score 0.0
# * Low - CVSS Score 0.1 - 3.9
# * Medium - CVSS Score 4.0 - 6.9
# * High - CVSS Score 7.0 - 8.9
# * Critical - CVSS Score 9.0 - 10.0
#severity-threshold =

# If this is true, then cargo deny will use the git executable to fetch advisory database.
# If this is false, then it uses a built-in git library.
# Setting this to true can be helpful if you have special authentication requirements that cargo-deny does not support.
# See Git Authentication for more information about setting up git authentication.
#git-fetch-with-cli = true

# This section is considered when running `cargo deny check licenses`
# More documentation for the licenses section can be found here:
# https://embarkstudios.github.io/cargo-deny/checks/licenses/cfg.html
[licenses]
unused-allowed-license = "allow"
# List of explicitly allowed licenses
# See https://spdx.org/licenses/ for list of possible licenses
# [possible values: any SPDX 3.11 short identifier (+ optional exception)].
allow = [
    "MIT",
    "Apache-2.0",
    "Apache-2.0 WITH LLVM-exception",
    "BSD-3-Clause",
    "BSD-2-Clause",
    "ISC",
    "Unicode-DFS-2016",
    "OpenSSL",
    "Unlicense",
    "Unicode-3.0",
]
# The confidence threshold for detecting a license from license text.
# The higher the value, the more closely the license text must be to the
# canonical license text of a valid SPDX license file.
# [possible values: any between 0.0 and 1.0].
confidence-threshold = 0.8
# Allow 1 or more licenses on a per-crate basis, so that particular licenses
# aren't accepted for every possible crate as with the normal allow list
exceptions = [
    # Each entry is the crate and version constraint, and its specific allow
    # list
    #{ allow = ["Zlib"], name = "adler32", version = "*" },
]

# Some crates don't have (easily) machine readable licensing information,
# adding a clarification entry for it allows you to manually specify the
# licensing information
#[[licenses.clarify]]
# The name of the crate the clarification applies to
#name = "ring"
# The optional version constraint for the crate
#version = "*"
# The SPDX expression for the license requirements of the crate
#expression = "MIT AND ISC AND OpenSSL"
# One or more files in the crate's source used as the "source of truth" for
# the license expression. If the contents match, the clarification will be used
# when running the license check, otherwise the clarification will be ignored
# and the crate will be checked normally, which may produce warnings or errors
# depending on the rest of your configuration
#license-files = [
    # Each entry is a crate relative path, and the (opaque) hash of its contents
    #{ path = "LICENSE", hash = 0xbd0eed23 }
#]

[[licenses.clarify]]
name = "ring"
version = "*"
expression = "MIT AND ISC AND OpenSSL"
license-files = [
    # Each entry is a crate relative path, and the (opaque) hash of its contents
    { path = "LICENSE", hash = 0xbd0eed23 }
]

[licenses.private]
# If true, ignores workspace crates that aren't published, or are only
# published to private registries.
# To see how to mark a crate as unpublished (to the official registry),
# visit https://doc.rust-lang.org/cargo/reference/manifest.html#the-publish-field.
ignore = false
# One or more private registries that you might publish crates to, if a crate
# is only published to private registries, and ignore is true, the crate will
# not have its license(s) checked
registries = [
    #"https://sekretz.com/registry
]

# This section is considered when running `cargo deny check bans`.
# More documentation about the 'bans' section can be found here:
# https://embarkstudios.github.io/cargo-deny/checks/bans/cfg.html
[bans]
# Lint level for when multiple versions of the same crate are detected
multiple-versions = "allow"
# Lint level for when a crate version requirement is `*`
wildcards = "allow"
# The graph highlighting used when creating dotgraphs for crates
# with multiple versions
# * lowest-version - The path to the lowest versioned duplicate is highlighted
# * simplest-path - The path to the version with the fewest edges is highlighted
# * all - Both lowest-version and simplest-path are used
highlight = "all"
# List of crates that are allowed. Use with care!
allow = [
    #{ name = "ansi_term", version = "=0.11.0" },
]
# List of crates to deny
deny = [
    # Each entry the name of a crate and a version range. If version is
    # not specified, all versions will be matched.
    #{ name = "ansi_term", version = "=0.11.0" },
    #
    # Wrapper crates can optionally be specified to allow the crate when it
    # is a direct dependency of the otherwise banned crate
    #{ name = "ansi_term", version = "=0.11.0", wrappers = [] },
]
# Certain crates/versions that will be skipped when doing duplicate detection.
skip = [
    #{ name = "ansi_term", version = "=0.11.0" },
]
# Similarly to `skip` allows you to skip certain crates during duplicate
# detection. Unlike skip, it also includes the entire tree of transitive
# dependencies starting at the specified crate, up to a certain depth, which is
# by default infinite
skip-tree = [
    #{ name = "ansi_term", version = "=0.11.0", depth = 20 },
]

# This section is considered when running `cargo deny check sources`.
# More documentation about the 'sources' section can be found here:
# https://embarkstudios.github.io/cargo-deny/checks/sources/cfg.html
[sources]
# Lint level for what to happen when a crate from a crate registry that is not
# in the allow list is encountered
unknown-registry = "warn"
# Lint level for what to happen when a crate from a git repository that is not
# in the allow list is encountered
unknown-git = "warn"
# List of URLs for allowed crate registries. Defaults to the crates.io index
# if not specified. If it is specified but empty, no registries are allowed.
allow-registry = ["https://github.com/rust-lang/crates.io-index"]
# List of URLs for allowed Git repositories
allow-git = []